201 stainless steel plate allowable deviation range is what? The following by green and stainless steel to introduce to you. 201 stainless steel plate has acid resistance, alkali resistance, high density, polishing, no bubbles, no pinholes, etc., is the production of a variety of watchcase and watchband bottom cover of high-quality materials. Mainly used for making decorative pipe, industrial pipe and some shallow stretching products.

 201 stainless steel plate thickness allowable deviation is 0.2mm. The corrosion resistance of stainless steel mainly depends on its alloy composition and internal structure, chromium plays a major role. Chromium has high chemical stability, can form passivation film on the steel surface, the metal and the outside world, protect the steel plate from oxidation, improve the corrosion resistance of the steel plate. The corrosion resistance of the passivated film decreases after it is damaged.

The thickness tolerance of 201 stainless steel sheet shall be within 5 wires for sections less than 4mm, and within 10 wires for sections greater than 5mm to 100mm.

 The allowable deviation of steel plate thickness is generally between 0.08 and 2.00mm, which is what I have learned. If the host has a better answer, we can exchange.

 The tensile strength of 2mm 201 is about 800-850MPa. The general shear strength is 0.6~0.8 of the tensile strength. The shear strength of shot mud in refractories is called the degree of erosion and is expressed in MPa. There is a special pellet erosion component tester. According to Coulomb’s law, soil shear strength τ=σtanφ+c, where φ is the Angle of internal friction, c is the cohesion of soil.

 To sum up, the above is the 201 stainless steel plate allowable deviation range is the main content, if you do not understand the place can call to consult our company.